ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 11)

- 7 -
the Encoder’s function between selecting parameters and changing values. For more information on
parameters, see page 28.
)
PROCESSORS (A) & (B) ENCODER / SWITCH
The first two Encoders are used separately to view and modify their corresponding processor’s
parameters and effects. The Encoders can be turned and pressed while editing, and their action is
explained in the previous paragraph. When the MIDI/Util button is pressed, both Encoders work
together to set global parameters: this is explained in the MIDI/Util paragraph below. In Preset Mode, the
Encoders can be turned and pressed to select and load new effects. See the tutorials starting on page 14 for
more information.
*
ROUTING BUTTON
Routings control the way that sound is processed through the DMV-PRO and how each Input feeds each
Output. Repeatedly pressing the Routing button will scroll through the four internal, audio routings: Twin
Stereo, Cascade, Discrete 4, and Multi FX. (For a description and diagram of each routing, see page 26.) If
you press the Routing button while editing a preset, the LCDs will display the warning message. BE
CAREFUL! When routings are changed, the DMV-PRO reconfigures its internal architecture and loads in
default effects. The preset’s former effects, class, and parameter values are all replaced.
+
MIDI/UTIL BUTTON
Press the MIDI/Util button to edit the DMV-PRO’s global parameters: MIDI base channel, program change
mappings, Dry Kill/Global Mix settings, LCD view angle; and also to perform a MIDI dump and Factory Reset.
After pressing the MIDI/Util button, turn the Preset Encoder to scroll both LCDs through different lists of global
parameters. When you see the parameter that you want to change in one of the LCDs, turn its corresponding
Encoder to change values.
,
STORE BUTTON
The DMV-PRO contains 100 memory locations. To store a preset in one of these locations, press the Store
button. The Preset Display will flash the current preset number. Turn the Preset Encoder to select a preset
number to overwrite or just leave it on the current one, if desired. Press Store again and the current preset will
be saved to the location you selected. If you press any button other than Store or don’t press another button
within 10 seconds, the save command will be aborted. See the tutorial on page 17 for more information on
storing presets.
-
BYPASS BUTTON
When the DMV-PRO is bypassed, all processed sound is blocked from reaching the outputs, leaving only dry
(unprocessed) signal. Press the Bypass button to toggle Bypass on and off. (When Bypass is on, the Preset
Display alternates between the current preset number and
-,
.) Individual effects can also be bypassed; this