ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 40)

- 36 -
Dynamic
The Dynamic Delay uses input level to switch the Regeneration amount between its preset value and 0.
DUCKING CLASSIC CONCERT GATED MIC PLACEMENT DYNAMIC
Delay ±1ms Delay ±1ms Delay ±1ms Delay ±1ms Mic Distance Delay ±1ms
Delay ±50ms Delay ±50ms Delay ±50ms Delay ±50ms Cabinet Size Delay ±50ms
Regeneration Regeneration Regeneration Regeneration Mic Separation Regeneration
Number of Taps Number of Taps Number of Taps Number of Taps Mic Position Number of Taps
Shape of Taps Shape of Taps Shape of Taps Shape of Taps Shape of Taps
Effect Enabled Effect Enabled Regen Enabled
Attack/Release Attack/Release
DELAY PARAMETERS:
Attack/Release:
In the Ducking class, this control sets the fade time of the effect after it has been dynamically triggered. In
the Dynamic class, it sets the time taken for the Regen parameter to switch between the preset amount
and a value of 0, depending on audio level. The Attack range is 1 ms to 11.8 seconds and the Release
range is from 50 ms to 1.18 seconds.
Cabinet Size:
This parameter sets the size of the simulated speaker cabinet. The adjustable dimensions are from 2 X 2
feet to 52 X 14.5 ft.
Delay ±1ms:
Changes the delay time in 1-millisecond steps. The total amount of delay, per effect, is 1.25 seconds.
Delay ±50ms:
Changes the delay time in 50 millisecond steps.
Effect Enabled:
In Ducking and Gated classes, this control sets the audio input level that controls the gating action of the
effect. Signals that fall within this control’s setting (for example, above –10 dB) are heard and ones that are
not are muted.
Mic Distance:
This parameter sets the distance of the “microphones” to the simulated speaker cabinet. This control is set
in feet and its range is based on the Cabinet Size setting.
Mic Position
In the Mic Placement class, this parameter sets the horizontal and vertical positioning of the “microphones”
in front of the simulated speaker cabinet. This control is set in feet and its range is based on the Cabinet
Size setting. Arrow characters (
↑
&
→
) are used to designate the vertical (
↑
) and horizontal (
→
) positioning,