ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 17)

- 13 -
&
OUTPUTS #1–4
All four Outputs are single-ended (unbalanced) ¼” jacks with low impedance. A preset’s routing determines
the use of each Output jack. For example, Cascade and Multi FX Routings do not use Outputs #3 and #4. For
more information on the different configurations of the DMV-PRO’s inputs and outputs, see page 26 and the
tutorial starting on page 14.
'
OUTPUT LEVEL SWITCH
The Output Level switch is used for matching the DMV-PRO’s output level to your system. Matched signal
levels are important for controlling the amount of distortion present in the final signal. Too little signal results in
a disproportionate amount of noise, while too much signal sounds distorted and gritty. The Output Level
switch has two positions: in (instrument level) and out (line level). Be sure to check your other equipment’s
manual for hints on setting its appropriate input levels.
NOTE: The Output switch’s setting is global, meaning that it always affects the DMV-PRO’s output level,
regardless of which preset is engaged.
(
INPUTS #1–4
All Inputs are single-ended (unbalanced) ¼’ jacks with high impedance. As with the Output jacks, a preset’s
routing determines the use of each Input jack. For example, Cascade and Stereo Routings do not use Inputs
#3 and #4. For more information on the different configurations of the DMV-PRO’s inputs and outputs, see
page 26 and the tutorial starting on page 14.
If any Input (except #1) does not have a plug inserted, it will automatically take its signal from the closest,
lower-numbered, input jack that has a plug inserted. For example, if a ¼” plug is only inserted into Input #1,
then Inputs #2, #3, and #4 will also use the signal from Input #1.
)
INPUT LEVEL SWITCH
The Input Level switch is similar to the Output Level switch, but is used for matching the level of the incoming
signal to the DMV-PRO. The Input Level switch has two positions: in (instrument level) and out (line level). Be
sure to check your other equipment’s manual for hints on setting its appropriate output levels.
NOTE: Like the Output Level switch, the Input Level switch’s setting is global, meaning that it always affects
the DMV-PRO’s input level, regardless of which preset is engaged.