ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 24)

- 20 -
this ordering. You could, for example, set a received program change value of 1 to recall DMV-PRO preset
#40, a program change value of 2 to recall DMV-PRO preset #5, and a program change value of 3 to also
recall DMV-PRO preset #5. Like MIDI Channel, the DMV-PRO’s MIDI Map is set in MIDI/Util Mode and is
automatically saved when changed.
Controllers 1–4:
The DMV-PRO’s continuous controller mappings are extremely flexible and add a great deal of power to the
unit. Each effect can have up to four MIDI controllers assigned to change parameter values. Discrete 4
routing, which has four separate effects, can have up to 16 MIDI controller mappings per preset! Controller
mappings can, for example, make a synthesizer’s modulation wheel change reverb time, a footswitch bypass
an effect, or even allow keyboard notes to spin up the rotary effect. Changes to a preset’s controller mappings
are edited with the rest of an effect’s parameters.
Editing the Global MIDI Parameters:
The DMV-PRO’s MIDI Channel and MIDI Map are global parameters, meaning that they affect the whole unit,
not just one preset. Global parameters are accessed by pressing the MIDI/Util button. Now the Preset
Encoder is used to scroll both LCDs through their separate listing of global parameters. Each LCD shows a
different parameter and its value. To change a parameter’s value, turn the corresponding Processor Encoder.
Setting the MIDI Channel:
Turn the Preset Encoder to the left until [
1$ ' TA
] is in LCD (A). The MIDI Channel can be set
between 1 and 16, or to ALL, for Omni mode. Turn Encoder (A) to change values. If you select ALL, the
DMV-PRO will receive program change and SysEx data on all 16 MIDI channels, but it will only send out
SysEx messages on Channel 1. The MIDI Channel is automatically saved whenever it is changed, so when
you are done, turn the Preset Encoder to view another MIDI/Util parameter or press the MIDI/Util button to
exit this mode.
Setting the MIDI Map:
To change the DMV-PRO’s MIDI map, turn the Preset Encoder until LCD (A) & (B) respectively read
[
0-&0 , ' T&$<
] and [
= 0$1$2<
]: