ART Pro Audio DMV-Pro - Dual True-Stereo Effects Processor - Manual (Page 19)

- 15 -
Cascade
Cascade routing also has two effects with two
linked engines, but the output of the first group is
fed into the second. In this routing, you have two
stacked, true-stereo effects. Only Inputs and
Outputs #1 and #2 are used. The first effect
(Engines #1 and #2) is edited in Processor (A),
and the second effect (Engines #3 and #4) is
edited in Processor (B).
Discrete 4 (mono)
In Discrete 4 routing, each engine separately processes one
channel of sound and is just like having four mono effects.
Inputs and Outputs #1–4 correspond to Engines #1–4.
Engines #1 and #2 are edited in Processor (A) and Engines
#3 and #4 are edited in Processor (B).
Multi FX
Multi FX routing combines the signal from Inputs #1 and #2 and runs it in series through Engines #1 and #2.
The signal is then split and fed to both inputs of linked engines #3 and #4, which are running in true-stereo.
The signal from Engine #3 is sent to Output #1 and the signal from Engine #4 is sent to Output #2. Inputs and
Outputs #3 and #4 are not used. Processor (A) controls the two mono effects (Engines #1 and #2) and
Processor (B) controls the true-stereo effect group (Engines #3 and #4).
NOTE: See page 26 for more information on the DMV-PRO’s versatile routing configurations.