AMETEK CSW Series User Manual
Page 29

User Manual
California Instruments
CSW Series
29
2.6 Special Features, OptionsEP5362706-05 and Accessories
Option
Description
- 704
Mil Std 704D & E test firmware.
Mil Std 704A, B, C, & F test software (refer to Avionics Software Manual P/N
4994-971 for details).
Note: Requires use of CSWGui Windows application software provided on
CD ROM CIC496.
- 787
Boeing 787 Test software (refer to Avionics Software Manual P/N 4994-971
for details).
Note: Requires use of CSWGui Windows application software provided on
CD ROM CIC496.
- 160
RTCA/DO-160D test firmware
RTCA/DO-160E test software (refer to Avionics Software Manual P/N 4994-
971 for details)..
Note: Requires use of CSWGui Windows application software provided on
CD ROM CIC496.
- 411
IEC 1000-4-11 test firmware
- 413
IEC 1000-4-13 test hardware and firmware
-ABD
Airbus ABD0100.1.8 Test software (refer to Avionics Software Manual P/N
4994-971 for details)..
Note: Requires use of CSWGui Windows application software provided on
CD ROM CIC496.
-AMD
Airbus AMD24C Test software (refer to Avionics Software Manual P/N 4994-
971 for details)..
Note: Requires use of CSWGui Windows application software provided on
CD ROM CIC496.
-LAN
Adds Ethernet interface (RJ45 connector) for local area network connection.
(Available on P/N 7000-485 and 7000-486 models only).
-LF
Refer to detailed -LF Function Specification in section 2.1.2
-FC
Frequency accuracy is ± 0.25% of program value.
- RMS
Rack mounting kit with slides. Removable rack ears/handles standard.
-LK
Clock/ Lock Option. With this option enabled the programmed frequency
resolution is 1 Hz for all programmed values of frequency. If the upper
frequency limit is 819 Hz or less the standard program resolution applies.
Not available with FC option.
-HF
CSW5550 with HF option have been modified to allow the upper frequency
limit to be extended from 5KHz to 7990 Hz. Refer to detailed -HF Function
Specification in Section 2.1.2
-ELF
CSW5550 with ELF option have been modified to allow the lower frequency
limit to be set down to 2 Hz