AGI Security GVASBOX-100 - Manual (Page 75)

Other Functions
67
7
8. To delete the enrolled fingerprint, place the mouse pointer on the desired fingerprint
image. The button appears. Click the button to delete the fingerprint.
9. For the Anti-duress function, select a fingerprint from the Anti-duress drop-down list.
When the cardholder is forced to open the door under threat, he can present the
designated finger to activate an alarm and send a signal to the GV-ASManager for
warning.
10. Click OK to apply the settings.
7.4.3 Uploading Fingerprints to Controllers
You can upload fingerprints to any Door/Gate installed with GV-GF 1901/1902 readers for
access control. Each GV-GF Fingerprint Reader can store up to 1,900 fingerprints.
1. Ensure the GV-GF Fingerprint Reader has been set up on the GV-AS Controller. When
the GV-GF Fingerprint Reader is detected on the GV-AS Controller, a green mark should
appear in the Setting Status field on the GV-AS Controller’s Web interface. See GV-AS
Controller Installation Guide.
Figure 7-10
2. On the menu bar of GV-ASManager, click Setup and select Fingerprint Access. The
Fingerprint Access dialog box appears.
3. Select the desired Controller and Door/Gate in the right pane.