AGI Security GVASBOX-100 - Manual (Page 34)

26
4.3 Setting Cards
Once you have configured the controller, you may start enrolling cards. All new cards must be
enrolled into the GV-ASManager before access is allowed. Using GV-AS100, GV-AS110 and
GV-AS400, up to 40,000 cards can be stored. If a card that was not enrolled is presented to
the reader, the message Access Denied: Invalid Card will be displayed.
Depending on how many cards you need to program, you can simply add them one at a time
or use the batch function to add a group of cards.
4.3.1 Adding a Single Card
1. To add one card, use one of these ways:
• Present the card to the reader. The message Access Denied: Invalid Card is
displayed. Right-click the message and select New/Edit Card. The New a Card
dialog box appears with card number and code type entered (Figure 4-7). Then follow
Step 3 to complete other settings.
• On the menu bar, click Personnel and select Cards. This window appears.
Figure 4-6