AGI Security GVASBOX-100 - Manual (Page 29)

Settings
21
4
4.2 Adding Controllers
To add the GV-AS Controller to the GV-ASManager, follow these steps:
• Step 1 Configuring a Controller
Establish the communication between the GV-AS Controller and GV-ASManager.
• Step 2 Configuring a Door
Define the doors on a door controller.
4.2.1 Step 1: Configuring a Controller
1. On the menu bar, click Setup and select Device. The Controller List dialog box appears.
2. Click the Add icon on the top left corner. This dialog box appears.
Figure 4-1
3. Enter ID and Name of the Controller, select Type of the Controller and click OK. This
dialog box appears.
Figure 4-2
Note: The Controller ID is set ahead with GV-ASKeypad or Web interface. Refer to GV-AS
Controller Installation Guide.