AGI Security GVASBOX-100 - Manual (Page 60)

52
To configure Anti-Passback for the three GV-AS400 Controllers:
1. Access the AS400 Setting page of the Controller No. 1 Web interface. In the
Anti-Passback section, select Enable and enter Info IP that is the IP address of
Controller No. 2, e.g. 192.168.0.12.
Figure 6-2
2. Access the AS400 Setting page of the Controller No. 2 Web interface. In the
Anti-Passback section, select Enable and enter Info IP that is the IP address of
Controller No. 3, e.g. 192.168.0.13.
3. Access the AS400 Setting page of the Controller No. 3 Web interface. In the
Anti-Passback section, select Enable and enter Info IP that is the IP address of
Controller No. 1, e.g. 192.168.0.11.
4. On the ASManager, select Local Anti-Passback (Figure 6-1) to start the function.
To reset Anti-Passback on GV-ASManager or GV-ASRemote, right-click the Host or
Controller icon on the Device View window (Figure 3-3) and select Reset Anti-Passback.