AGI Security GVASBOX-100 - Manual (Page 69)

Other Functions
61
7
7.2.2 Setting E-Mail Server
Before you can send out e-mail alerts, you should configure the e-mail server.
1. On the menu bar, click Tools and select Email Server Settings. This dialog box
appears.
Figure 7-5
2. Set up the following options:
„ Name: Type the sender’s name.
„ E-Mail Address: Type the sender’s e-mail address.
„ Authentication: If your mail server requires authentication for sending e-mails,
select one type of authentication, and type the valid username and password.
„ Host Name/Address: Type the name of the mail server.
„ Command Port: Keep the default port 25, or modify it to match that of the mail
server.
„ SSL: Enable the Secure Sockets Layer (SSL) protocol to ensure the security and
privacy of Internet connection. When the option is enabled, the Command Port is
changed to 465.
„ Message Priority: Assign the message a priority so the recipient knows to either look
at it right away (high priority) or read it when time permits (low priority). A high priority
message has an exclamation point next to it. Low priority is indicated by a down
arrow.
„ Send to: Type a valid e-mail address and click the Test button to check if the server
setup is correctly configured.