AGI Security GVASBOX-100 - Manual (Page 51)

Video Integration
43
5
• Click Search to detect all GeoVision IP devices on the same LAN. After the found IP
device is added, you must click the Modify button to enter its login ID and password.
6. Expand the Host folder listed in the DVR List dialog box (Figure 5-2), select one camera
and click OK. The mapped Host Name and Camera are displayed on the Controller
Setup dialog box.
7. To map the second camera to the door, click the second Arrow button, and follow Steps
5 and 6 to add another camera.
8. Click OK and return to the main screen.
9. Click the specific door on the Device View window. The associated live view is displayed
on the Live Video window.
Tip: You can modify the host or camera name in the DVR List dialog box (Figure 5-2) by
clicking the listed name directly.
5.2 Accessing a Live View
After mapping cameras to doors, use one of the following methods to access a live view on
the Live Video window:
• On the Device View window, click the desired door. Its associated live view will appear.
• On the Camera List window, click the desired camera. Its associated live view will
appear.
• On the Alarm Monitor and Access Monitor windows, click the desired event. Its
associated live view will appear.
To access live views from multiple IP devices, see 5.4 The Multiview Window below.