AGI Security GVASBOX-100 User Manual
Page 33
Settings
25
4
6. The settings in the Alarm Event section are OPTIONAL unless an alarm device is
installed on the GV-AS Controller. Enable the desired alarm conditions that will cause the
alarm to occur: Held Open, Force Open, Tamper, Fire Alarm, and Access Denied.
Alarm Continuous Time: Enter the number of seconds that the alarm sounds.
7. The settings in the Camera Mapping section are OPTIONAL unless a camera is installed
at the secure site. For details see Chapter 5 Video Integration.
8. Click OK several times and return to the main screen. A controller folder tree will be
displayed on the Device View window as example below.
If the icon
appears, it indicates the connection between the controller and
GV-ASManager has been established.
If the icon
appears, it indicates the connection failed. Make sure the above
connection setup is correctly configured.
Figure 4-5