Zilog EZ80L92 - Manual (Page 57)

eZ80L92 Development Kit
User Manual
UM012913-0407 Mounting the Module
53
Mounting the Module
While mounting the eZ80L92 Module onto the eZ80Acclaim! ® Develop-
ment Platform, check its orientation to the platform to ensure a correct fit.
Pin 1 of JP1 on the eZ80L92 Module must align with pin 1 of JP1 on the
eZ80Acclaim!
® Development Platform; Pin 1 of JP2 on the eZ80L92
Module must align with pin 1 of JP2 on the eZ80Acclaim! ® Development
Platform.
Changing the Power Supply Plug
The universal 9 V DC power supply offers three different plug
configurations and a tool that aids in removing one plug configuration to
insert another, as illustrated in
Figure 15 .
Follow the steps below to exchange one plug configuration for another:
1. Place the tip of the removal tool into the round hole at the top of the
current plug configuration.
2. Press to disengage the keeper tab and push the plug configuration out
of its slot.
Figure 15. 9 V DC Universal Power Supply Components