WaveWare Alert Utility - Manual (Page 32)

Step 3 – Recipient Configuration – TAP Recipients
To Setup a TAP Paging System for an Output, Click on the Button labeled “ Configure TAP Recipients ”.
See Fig. 48
Fig. 48
Configure TAP Recipients
To Add a Recipient, Click the “ Add ” Button in the TAP Recipients Setup Screen. See Fig. 49
Enter the “ Name and the Output PIN ” for a Recipient and click “ Add ”.
Under “ Routing ” Choose the Paging System to be used with this Recipient. See Fig. 50
Fig. 49
TAP Recipient Setup List – Add Recipient
Fig. 50
Add TAP Recipient
Next: Step 3 – Recipient Configuration – E-Mail Recipients
32