WaveWare Alert Utility - Manual (Page 30)

Step 2 – Configuration – Output – Text-to-Speech
NOTE: The “Text-to-Speech” Output is an Additional Purchase
To use the Text-to-Speech for an Output, you will need to Configure the Text-to-Speech Engine which will be
used with this Application. To Add a Text-to-Speech Output, Place a Check Mark next to “ Text-to-Speech ” and
then Click on the “ Configure Text-to-Speech ” Button. See Fig. 45
Fig. 45 Text to Speech
In the “Configure Text-to-Speech” Screen, Choose the “ Output Voice ”, “ Output Play Qty ” and “ Playback Rate ”.
You may also check the Speech Settings by Entering a Test Message and click the “ Test ” Button. See Fig. 46
Fig. 46 Configure Text to Speech Options
Requires Speakers attached to the PC
Next: Step 3 – Recipient Configuration – Overview
30