WaveWare Alert Utility - Manual (Page 23)

Step 2 – Configuration – Output – WaveWare Paging Client
To use a “WaveWare Paging Client” for an Output, you will need to Configure the Enterprise Paging Server that
will be used with this Application. To Add a Paging Client, Place a Check Mark next to “ WaveWare Paging Client ”
and then Click on the “ Configure Paging Server ” Button. See Fig. 31
Fig. 31 WaveWare Paging Client
Click on the “Configure Paging Server” Button
Enter the “ IP Address ” of the Enterprise Paging Server and Click OK . See Fig. 32
Fig. 32
Configure Server IP Address
Next: Step 2 – Output Configuration – SpectraLink
23