WaveWare Alert Utility - Manual (Page 29)

Step 2 – Configuration – Output – Plain Text
To use the Serial Port Plain Text for an Output, you will need to Configure the Plain Text that will be used with
this Application. To Add Serial Port Plain Text, Place a Check Mark next to “ Serial Port Plain Text ” and then Click
on the “ Configure Plain Text ” Button. See Fig. 43
Fig. 43 Plain Text
In the “Configure Plain Text Output” Screen, Choose the “ Com Port ” and “ Data Delimiter ”. See Fig. 44
Fig. 44 Choose Com Port and Data Delimiter
Next: Step 2 – Output Configuration – Text-to-Speech
29