WaveWare Alert Utility - Manual (Page 22)

Step 2 – Configuration – Output – Internet E-Mail (SMTP)
If using Internet E-Mail (SMTP) for Output, Click on the “ See Fig.
To use “Internet E-Mail” for an Output, you will need to Configure the Internet Email Server that will be used with
this Application. To Add an Internet Email Server, Place a Check Mark next to “ Internet E-Mail (SMTP) ” and then
Click on the “ Configure E-Mail Server ” Button. See Fig. 28
In the Configure E-Mail Output Screen, Fill-in the “ SMTP Host ”, (You may need to get this Information from the IT
Dept) and the “ From Name ” and “ From Email Address ”. If you want to use the “Message in Subject Line” Option,
then you will need to Fill-in the “Subject” Field. You also have the Options of the Email being “Priority” and to
use “Authentication” with User ID and Password. See Fig. 29
Fig. 28 Internet E-Mail (SMTP)
Click on the “Configure E-Mail Server” Button
Fig. 29
Configure Email Output
To Test the Mail Server, Fill-in the “ To: Address ” Field and Click on the “ Test Mail Server ” Button. See Fig. 29
You will get one of the Results as shown. See Fig. 30A and 30B
Fig. 30A
If you see this Screen, please check your Information
and configuration and try again.
Fig. 30B
If you see this Screen, you are ready for the next Step.
Next: Step 2 – Output Configuration – WaveWare Paging Client
22