KBC Networks ESML6-FL2 - Manual (Page 18)

Ethernet Switch User Manual
Manual_sw-ESML6-FL2-Rev1106
Copyright © KBC Networks Ltd. Page 17 of 64 www.kbcnetworks.com
Item Description
VLAN Mode
Select the ways to create VLANs based on port, 802.1Q with GVRP and
802.1Q without GVRP.
PVID
To specify the VLAN ID associated with untagged frames on the port. Eg. if
the default PVID of port 3 is 100, all untagged frames on port 3 are
associated with VLAN100. The default PVID of all ports is 1. When the user
wants to configure the devices which don’t support tagging and add them
to a VLAN, this feature is used. Only one untagged VLAN is permitted for
each port.
Ingress rule 1
(if frame is not a
member )
This rule is corresponding to the ingress rule 1 of web management: only
forward the frames with the appropriate VID to the port. With the space
key, the user chooses to forward or drop the frames that have no
appropriate VID.
Ingress rule 2
(if frame is
untagged) This rule is corresponding to the ingress rule 1 of web management: drop
the untagged frames. With the space key, the user chooses to forward or
drop the untagged frames.
Table 3-5 VLAN Descriptions
b) Add a VLAN Group
From this option, the user can create a VLAN and add tagged/untagged members to it.
The specific descriptions of each item are shown in Table 2-6:
Item Description
VLAN Name Enter new VLAN name
VLAN ID Enter number to identify the VLAN group from 2-4094, the default value
is 1.
VLAN Protocol Press the space key to select protocol.
Members
Press the space key to select VLAN members including 3 types:
Tagged: the port is tagged member.
Untagged: the port is untagged member.
None: the port is not the member of the VLAN.
Table 3-6 VLAN Terms
Fig 3-17 Create a VLAN Group