KBC Networks ESML6-FL2 - Manual (Page 16)

Ethernet Switch User Manual
Manual_sw-ESML6-FL2-Rev1106
Copyright © KBC Networks Ltd. Page 15 of 64 www.kbcnetworks.com
2. Port/Trunk Configuration
This menu option is used to modify each port’s status and configure the link aggregation
groups. The user can switch to other data items with the space key. The descriptions of
each configuration are as shown in Table 3-2.
Item Description
Enable Enable or disable the port
Auto-negotiation To enable or disable the auto-negotiation function of each port
Port rate/transmission Set the port rate to 10Mbps or 100Mbps, half or full duplex
Flow control Enable or disable the flow control function
Group Configure the link aggregation group. There are 4 groups that can be
configured.
Alarm Enable or disable the alarm function of the port
Table 3-2 Port aggregation/alarm configuration
3. Port Mirroring Configuration
Port mirroring is used to monitor the network traffic of one port via another selected
port. The descriptions of each configuration are as shown in Table 3-4:
Fig 3-13 Port / Trunk Configuration
Fig 3-14 Port Mirroring Configuration