Junger Audio T*AP Television Audio Processor Edition - Manual (Page 8)

T*AP
4
hardware concept
The T*AP consists of a Base Unit that carries all relevant connectors and a detachable
X*AP Remote Panel both in 19" 1RU format.
The X*AP Remote Panel is powered by POE (Power Over Ethernet) and designed to control multiple
Base Units one at a time.
For a stand alone installation the X*AP Remote Panel may be attached to a dedicated Base Unit by
brackets.
In this case we highly recommend to support the chassis by additional brackets screwed to the rear as shown
above or by metal angles supporting the device from the bottom.
Base Unit front panel view
The front panel of the Base Unit shows 4 status LEDs :
STATUS
general representation of the device status. It is a sum display of all relevant
status information
Power 1 status of power supply # 1
Power 2 status of power supply # 2
BYPASS shows if one of the audio processing parts of the T*AP is put into bypass mode