Junger Audio T*AP Television Audio Processor Edition - Manual (Page 58)

T*AP
54
setup GUI – EVENTS – Preset Events – Routing
The ROUTING system has no sub panes and therefore only one set of 20 presets. They may be allocated
to preset events. For this example it is Preset2:
The "Change Prog Conf" Event is not used to change routing.
setup GUI – EVENTS – Preset Events – Dolby Processing
The Dolby processing system has several setup sections for the hardware parts (decoder, encoders) as
well as for the metadata routing and the program specific sets of metadata. That is why the
Preset Events > Dolby Processing pane has nine columns:
The "Dolby Fail" event will load several presets (see above)
setup GUI – EVENTS – Preset Events – Audio Processing
The most comprehensive set of presets is offered for the Audio Processer, which has eight different
processing sections, a setup page, input / output and monitor pages, which you may (or may not) alter by
triggering the event named "+3dB" via the "LM Gain" trigger :
For the other two events "Change Prog Conf" and "Dolby Fail" there is no need to change anything in the
Audio Processor for this example so we do not select presets there