Junger Audio T*AP Television Audio Processor Edition - Manual (Page 46)

T*AP
42
When you press the soft button this window shows up on the PC screen :
The process must be enabled in order to get the correct display. You can do it either from the T*AP
GUI or from here. When starting this application the settings will be read from the T*AP and will be used
and displayed here. Pay attention that Max Gain is not set to 0dB.
If you change settings you must store them in the T*AP by first selecting a preset number and pressing
the button in the ON AIR section of the Spectral Signature pane afterwards.
See separate manual for J*AM for more details.