Junger Audio T*AP Television Audio Processor Edition - Manual (Page 20)

T*AP
16
setup GUI – connecting with the Base Unit – AUDIO PROCESSOR > Overview
You must open a browser and enter the IP address of the Base Unit
into the URL field and press . The browser will fetch the necessary information and opens the
entrance page :
It is the AUDIO PROCESSOR pane with its sub pane Overview.
On the following pages we will go through the various panes of the setup GUI.
Firstly you must set up basic things such as program configuration, give the programs meaningful names and
set the synchronization source. You may also give the device a name, tell it its location and define an
administrative contact which may be used by monitoring systems of your house (e.g. via SNMP).
These settings you will find under the SYSTEM link.