Junger Audio T*AP Television Audio Processor Edition - Manual (Page 50)

T*AP
46
setup GUI – AUDIO PROCESSOR – Voice Over (5.1 + 2 program configuration)
The program signal path for program 1 is 5.1 while the program 2 path is stereo.
The AUX input is used for the voice over signal.
This setup allows you to perform a manually or automatically controlled voice over for a surround and a
stereo program with the same voice signal :
In addition to the parameters for 2Ch voice over the 5.1 circuit has these extra parameters :
Channel [C, L/R, L/RC]
selects the channel where the voice over will be mixed to.
Center Divergence [0.00 – C only … 0.50 – LRC … 1.0 – LR only]
allows to widen the projection of the voice over signal.
Attenuated channels [ALL, Selected]
Attenuation (dB) [-30 … 0]