d&b V-Series - Manual (Page 5)

1.5. d&b ArrayCalc simulation software / TI 385
For both acoustic and safety reasons d&b line arrays must be
designed using the d&b ArrayCalc simulation tool. It is available as
a native stand-alone application for both Microsoft Windows (XP
or higher) and Mac OS X (10.4.10 or higher) operating systems
and can be downloaded at www.dbaudio.com .
The use of ArrayCalc is described in "TI 385 d&b Line array
design, ArrayCalc" which is also supplied with the . This TI includes
typical array configurations within the permitted load limits.
Carefully read this TI to become familiar with the operation and
behavior of ArrayCalc and in particular with the mechanical load
conditions and limitations.
The TI can be downloaded from the d&b website at
www.dbaudio.com .
We also recommend you to attend the regularly hosted d&b Line
array training seminars. Further information regarding the d&b
seminars can be requested directly from d&b audiotechnik sales
partners.
1.6. Operational safety
The assembly should always be carried out by two persons.
During assembly pay attention to the possible risk of crushing.
Wear suitable protective clothing.
Observe all instructions given on the respective instruction labels of
the rigging components (Flying frame, Load adapters), Touring
carts and loudspeaker cabinets.
When chain hoists are in operation ensure that there is nobody
directly underneath or in the vicinity of the load.
Do not under any circumstances climb on the array.
d&b ArrayCalc
d&b V-Series Rigging manual (1.9 EN) 5