d&b V-Series - Manual (Page 20)

2.11.2. Splay/Rear link mechanism
Release the respective Locking pin(s) and fold out the Splay/Rear
link.
2.11.3. Preset splay angles on V8/V12 cabinets
The splay angles between adjacent cabinets can be set in the
range from 0° to 14° in 1° steps. The splay angles are set at the
central rear rigging strands of the cabinets.
–
Insert and lock the Locking pin to the respective hole.
2.11.4. Park position V8/V12 Splay link
The Splay link of the last cabinet of an array may be kept in its
park position.
Note: In this case, the lowest cabinet can be set to the
following splay angles: 3°, 5° and 7° to 14°.
Splay/Rear link mechanism
Preset splay angle (e.g. 7°)
Park position V8/V12 Splay link
d&b V-Series Rigging manual (1.9 EN) 20