d&b V-Series - Manual (Page 10)

2.2. Z5382 V Safety chainset
The Z5382 V Safety chainset is supplied with the V Flying frame
and is used as a secondary safety device. Please also refer to
Þ Chapter 2.8. "Secondary safety" on page 16.
Specification
Lifting chain (DIN EN 818) 2-leg, 8 mm
Grade 8
Nominal length incl. hooks 416 mm (16.4")
Maximum sling angle b
Max
60°
Load rating 3.35 t (b: 0° - 45°)
2.5 t (b: 46° - 60°)
2.3. Z5381 V Hoist connector chain option
The Z5381 V Hoist connector chain is used to connect the lifting
motor(s) to the V Flying frame using the 2 t shackle which is
attached to the V Load adapter. Its length of 53 cm (21") allows
enough space for the hang of most 2 t motor chain containers and
avoids any impact on the vertical balance of the array when
suspended from a single pickpoint.
Specification
Lifting chain (DIN EN 818) 1-leg, 8 mm
Grade 8
Nominal length incl. hook 535 mm (21")
Load rating 2 t
d&b V-Series Rigging manual (1.9 EN) 10