d&b V-Series - Manual (Page 25)

3.2.2. V-SUB Column
Preparations
For this type of setup the Splay link of the frame must be attached
to «POSITION V-SUB». Check the position and alter it if necessary
as described in Þ Chapter 2.9. " Splay link of the frame"
Þ " Changing the Splay link position" on page 17.
1. Prepare the first cabinet
Prepare the Front links of the first cabinet as described in section
Þ Chapter 2.11. " Cabinet rigging mechanism" on page 19.
2. Attach the Flying frame to the first cabinet
1. Lower the frame onto the cabinet until the Front links fit into the
slots at the front of the frame.
2. Insert the second Locking pins of the cabinet's Front links on
both sides.
3. On the rear rigging strand of the cabinet, release both Locking
pins.
4. Fold the Splay link into the rigging strand and reinsert the
Locking pins.
Splay link of the frame – «POSITION V-SUB»
d&b V-Series Rigging manual (1.9 EN) 25