d&b V-Series - Manual (Page 18)

1. Release and remove the Locking pin of the Splay link at park
position and fold out the Splay link.
2. Unlock and remove the ring cotter of the fixing bolt.
3. Pull out the fixing bolt and remove the Splay link.
4. Attach the Splay link to its new position and insert the fixing
bolt.
5. Secure the fixing bolt using the ring cotter and ensure the ring
cotter is properly locked.
2.10. Cable pick
The Flying frame is equipped with an O-ring to allow the
attachment of a cable pick. To prepare the attachment of the cable
pick, proceed as follows:
1. Release the Locking pin holding the O-ring at park position.
2. Pull out the O-ring and reinsert the Locking pin.
Cable pick
d&b V-Series Rigging manual (1.9 EN) 18