BINDER KBF LQC 240 User Manual

Operating manual, Apt.line™ kbf lqc (e5.3)

This manual is related to the following products:

KBF LQC 720

Table of contents

Document Outline

EC – declaration of conformity
Product registration
1. Safety
- 1.1 Legal considerations
- 1.2 Structure of the safety instructions
- 1.3 Localization / position of safety labels on the unit
- 1.4 Type plate
- 1.5 General safety instructions on installing and operating the constant climate chamber
- 1.6 Intended use
- 1.7 Resistance of the humidity sensor against harmful substances
2. Unit description
- 2.1 Unit overview
- 2.2 Lateral control panel, right side
- 2.3 Lateral control panel, left side
- 2.4 Instrument panel
3. Completeness of delivery, transportation, storage, and installation
- 3.1 Unpacking, and checking equipment and completeness of delivery
- 3.2 Guidelines for safe lifting and transportation
- 3.3 Storage
- 3.4 Location of installation and ambient conditions
4. Installation and connections
- 4.1 Spacers for rear wall distance
- 4.2 Wastewater connection
- 4.3 Freshwater supply
- 4.4 Electrical connection
- 4.5 Installation and connection of the light cassettes
- 4.6 Connecting the light sensors
5. Start up
- 5.1 Function overview of the MB1 display program controller
- 5.2 Operating modes
- 5.3 Performance after power failures
- 5.4 Turning on the unit
6. Settings of the MB1 controller
- 6.1 Selection of the MB1 controller’s menu language
- 6.2 Function overview of the MB1 program controller displays
- 6.3 Menu settings in the “User-settings” menu
- 6.4 Menu settings in the “User Level” menu
7. Graphic representation of the historical measurement (chart recorder function)
- 7.1 Setting the storage rate
8. Manual Mode
- 8.1 Entering the set point values
- 8.2 Entering the set point values when operating without illumination
- 8.3 Performance after power failure in Manual Mode
9. Function of light measurement, and integration: Light Quantum Control
- 9.1 Illumination measurement and temporal integration
- 9.2 Toggling between displays of actual and integrated values
10. Program operation of the temperature, and humidity controller
- 10.1 Overview menu-based program entry
- 10.2 Entry of temperature values and fan speed
- 10.3 Entry of humidity values
- 10.4 Selecting between set-point ramp and set-point step
- 10.5 Program entry as set-point ramp or as set-point step
- 10.6 Advice for the programming of the different temperature or humidity transitions
- 10.7 Repetition of a section or several sections within a program
- 10.8 Performance after power failure in Program Mode
- 10.9 Starting a previously entered program
- 10.10 Deleting a program
- 10.11 Template for temperature profile
- 10.12 Template for humidity profile
- 10.13 Program table template for temperature and fan speed rate
- 10.14 Program table template for humidity
11. Temperature safety devices
- 11.1 Over temperature protective device (class 1)
- 11.2 Safety controller (temperature safety device class 3.1)
  - 11.2.1 Safety controller set-point types
  - 11.2.2 Checking and setting safety controller set-point type and safety controller set-point
- 11.3 Temperature safety device class 3.3 (DIN 12880) (option)
  - 11.3.1 Temperature safety device class 3.1
  - 11.3.2 Temperature safety device class 3.2
12. Notification and alarm functions
- 12.1 Notification and alarm system overview (auto diagnosis system)
- 12.2 Messages concerning the humidity system
- 12.3 Resetting the notification or alarm messages
13. Humidity system
- 13.1 Function of the humidifying and dehumidifying system
14. Defrosting at refrigerating operation
15. ICH compliant illumination according to CPMP/ICH/279/95 (Q1B)
- 15.1 BINDER ICH light
- 15.2 Adjustable light cassettes
16. Characteristic features of the light sensors
- 16.1 LUX sensor
- 16.2 UVA sensor
- 16.3 Spectral range
- 16.4 Spatial sensitivity
17. Options
- 17.1 Communication software APT-COM™ 3 DataControlSystem (option)
- 17.2 Interface RS 422 (option)
- 17.3 Data logger kits (option)
- 17.4 Analog outputs for temperature and humidity (option)
- 17.5 Zero-voltage relay alarm outputs for temperature and humidity for alarm transmission (option)
- 17.6 Water protected internal socket (option)
- 17.7 Keyboard locking (option)
- 17.8 Additional flexible Pt 100 temperature sensor (option)
- 17.9 External freshwater and waste-water cans (option)
- 17.10 BINDER Pure Aqua Service (option)
18. Maintenance, cleaning, and service
- 18.1 Maintenance intervals, service
- 18.2 Replacement of the fluorescent tubes
- 18.3 Calibrating the light sensors and adjusting the controller display
- 18.4 Cleaning and decontamination
  - 18.4.1 Cleaning
  - 18.4.2 Decontamination
- 18.5 Sending the unit back to BINDER GmbH
19. Disposal
- 19.1 Disposal of the transport packing
- 19.2 Decommissioning
- 19.3 Disposal of the unit in the Federal Republic of Germany
- 19.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
- 19.5 Disposal of the unit in non-member states of the EC
20. Troubleshooting
21. Technical description
- 21.1 Factory calibration and adjustment
- 21.2 Over current protection
- 21.3 Definition of usable volume
- 21.4 KBF LQC technical data
- 21.5 Equipment and options KBF LQC
- 21.6 Spare parts and accessories
- 21.7 Dimensions KBF LQC 240
- 21.8 Dimensions KBF LQC 720
22. Contamination clearance certificate
- 22.1 For units located outside North America and Central America
- 22.2 For units in North America and Central America
Word-Lesezeichen
- OLE_LINK9
- OLE_LINK5
- OLE_LINK3
- OLE_LINK18
- OLE_LINK19
- OLE_LINK4
- OLE_LINK6
- OLE_LINK21
- OLE_LINK22
- OLE_LINK1
- OLE_LINK2
Leere Seite