BINDER KBF LQC 240 User Manual
Page 37
KBF LQC (E5.3) 07/2014
page 37/114
6.2 Function overview of the MB1 program controller displays
The main operation level contains the following differ-
ent displays:
•
Normal display (Idle Mode or Manual Mode or
Program Mode)
•
Event List
•
Chart recorder function
•
Contact page
Button
VIEW ->
permits toggling between the displays.
The
Normal display enables comparison of the cur-
rent temperature and humidity (W) to the set-point
values (X) or shows the fan working rate.
CONTACT PAGE
BINDER Service contact display.
NORMAL DISPLAY Idle Mode
TEMP
20.0
22.1
°C
HUMID
30.0
21.7
%rH
VIS
0.0
0.0
UVA
0.0
0.0
LIGHT INTEGR. OFF
HAND
08:43:55 15.12.13
or
W
X
08:43:55 15.12.13
CONFIG
VIEW->
PGM
FAN SPEED
50
%
HAND
X - TEMP
26.8
°C
X - HUMID
58.6
%rH
No heating or refrigeration, no humidification or dehumidification. The actual values (X) approximate am-
bient temperature and humidity. Fan working at 50% rate. When the fluorescent tubes are turned on man-
ually, the actual values of light intensity are displayed, light integration is possible.
NORMAL DISPLAY Manual Mode
TEMP
20.0
22.1
°C
HUMID
30.0
21.7
%rH
VIS
0.0
0.0
UVA
0.0
0.0
LIGHT INTEGR. OFF HAND
08:43:55 15.12.13
Temperature and humidity values are maintained
according to the previous entered set-points (W).
The actual light intensity values are displayed. With
integration operating, the samples are automatically
exposed according to the entered target dose values
of UVA and visible spectral range.
NORMAL DISPLAY Program Mode
08:43:55 15.13.13
Program 1 / SEC 3 00 :10 :32
TEMP
20.0
22.1
°C
HUMID
30.0
21.7
%rH
VIS
0.0
0.0
UVA
0.0
0.0
LIGHT INTEGR. OFF AUTO
HAND
A temperature and humidity program entered be-
fore via a program table is run. When the fluores-
cent tubes are turned on manually, the actual val-
ues of light intensity are displayed, light integration
is possible.
08:43:55 15.12.13
Service Hotline
International: +49 7462 205 555
USA Toll Free: +1 866 885 9794
or +1 631 224 4340
: +7 495 988 1516
РоссияиСНГ
www.binder-world.com
CONFIG
VIEW->
VIEW->
Best conditions for your success