BINDER KBF LQC 240 - Manual (Page 48)

KBF LQC (E5.3) 07/2014 page 48/114
10. Program operation of the temperature, and humidity controller
The MB1 2-channel program controller permits programming temperature and humidity cycles. It offers
25 program memory positions with 100 program sections each. The total of program sections of all pro-
grams is limited to 500. It is not possible to link several programs.
For each program section a temperature set-point, a humidity set-point, the fan speed (0% to 100%), and
the switching-state of up to 8 operation lines (non-functional with standard unit) can be entered.
Programming is possible directly by the keypad of the controller or graphically by the software APT-
COM™ 3 DataControlSystem (option, chap. 17.1) specially developed by BINDER.
When turning on the fluorescent tubes manually, light integration is possible (chap 9).
10.1 Overview menu-based program entry
Displays showing the initial normal display in Idle Mode
TEMP 20.0 22.1 °C
HUMID 30.0 21.7 %rH
VIS 0.0 0.0
UVA 0.0 0.0
LIGHT INTEGR. OFF
HAND
08:43:55 15.12.13
W X
08:43:55 15.12.13
CONFIG VIEW-> PGM
FAN SPEED
50
%
HAND
X - TEMP
26.8
°C
X - HUMID
58.6
%rH
Hit button PGM. The window program selection appears.
Select a program via the arrow keys and confirm by ENTER
The following display serves to select a
subroutine:
TP-Program 1 Entry of temperature values and fan speed setting
TP-Program 2 Entry of humidity values
TP-Program 3 no function
DEL PGM
08:43:55 15.12.13
Prog select Fr. Abs. 372
Prog 1 PROG 01 
Prog 2 PROG 02 
Prog 3 PROG 03 
Prog 4 PROG 04 
Prog 5 PROG 05 
Prog 6 PROG 06 
Prog 7 PROG 07 
Prog 8 PROG 08 
Prog 9 PROG 09 
Prog10 PROG 10 
Prog11 PROG 11 
Prog12 PROG 12 
Prog13 PROG 13 
Prog14 PROG 14 
Prog15 PROG 15 
Prog16 PROG 16 
Prog17 PROG 17 