User leds, Push button switches, The flash tab – Altera Transceiver Signal Integrity User Manual
Page 31: User leds –7 push button switches –7, The flash tab –7
Chapter 6: Board Test System
6–7
Using the Board Test System
February 2013
Altera Corporation
Transceiver Signal Integrity Development Kit,
Stratix V GT Edition User Guide
User LEDs
The User LEDs control displays the current state of the user LEDs. Toggle the LED
buttons to turn the board LEDs on and off.
Push Button Switches
The read-only Push button switches control displays the current state of the board
user push buttons. Press a push button on the board to see the graphical display
change accordingly.
The Flash Tab
The Flash tab allows you to read and write flash memory on your board.
shows the Flash tab.
The following sections describe the controls on the Flash tab.
Figure 6–4. The Flash Tab
This manual is related to the following products: