Altera Partial Reconfiguration IP Core - Manual (Page 6)

When Enable bitstream compatibility check is turned on, the PR IP core creates a PR bitstream ID and
displays it in the configuration dialog box.
Related Information
• Partial Reconfiguration IP Core Parameters on page 6
• Partial Reconfiguration IP Core Ports on page 8
Partial Reconfiguration IP Core Parameters
IP Core Option Value Default Description
Use as PR Internal
Host
On or Off
On
Turn on this option to use the
PR IP core as an internal host.
Both
prblock
and
crcblock
WYSIWYG atom primitives are
auto-instantiated as part of your
design. Disable this option to use
the PR IP core as an external
host. You must connect
additional interface signals to the
dedicated PR pins or the external
prblock
and
crcblock
WYSIWYG atom primitives
interface signals if the PR IP core
is used as an external host.
Enable JTAG debug
mode
On or Off
On
Turn on this option to access the
PR IP core with the Programmer
to perform partial reconfigura‐
tion.
Enable Avalon-MM
slave interface
On or Off
Off
Turn on this option to use the
Avalon Memory Map slave
interface
Enable bitstream
compatibility check
On or Off
Off Turn on this option to check the
bitstream compatibility during
PR operations for External Host.
The bitstream compatibility
check feature is always enabled
for PR Internal Host. The PR
bitstream ID value must be
specified if this option is enabled
for PR External Host.
6 Partial Reconfiguration IP Core Parameters
UG-PARTRECON
2015.05.04
Altera Corporation Partial Reconfiguration IP Core
Send Feedback