Pilz PSS67 F 16DI SB-T - Manual (Page 24)

Supply Voltage
6-2 Operating Manual: PSS67 F 16DI SB-T
Use a 5-pin M12 plug-in connector to connect the module to the external
supply voltage.
The module also has an M12 socket which is physically next to the M12
connector; this is used to distribute the supply voltage to other modules.
Fig. 6-1: Example for the supply and the forwarding of the supply voltages
WARNING!
The current carrying capacity of the M12 connectors is 4 A per contact.
Exceeding the permissible current carrying capacity may lead to connector
damage. Please note that the connection for the outgoing supply voltage
is not monitored for overload
SafetyBUS p
Supply Supply