Pilz PSS67 F 16DI SB-T - Manual (Page 11)

2 - 1 Operating Manual: PSS67 F 16DI SB-T
Overview
The module PSS67 F 16DI SB-T can be used in a rugged industrial
environment up to protection type IP67.
It has 16 digital inputs and 4 dedicated test pulse outputs.
The inputs are suitable for connecting single or dual-channel safety-related
input devices, with or without test pulses. The inputs can be assigned to
two I/O-Groups on SafetyBUS p.
The 4 test pulse outputs are available via 8 M12 plug-in connectors. The
test pulses are permanently assigned to the inputs. The test pulse outputs
can also be configured as 24 VDC outputs.
The PSS67 F 16DI SB-T requires a 24 V supply, which provides power to
both the module electronics and the dedicated test pulse outputs.
The module is isolated from SafetyBUS p through optocouplers.
NOTICE
Before installing the module you should read and take note of the
information contained in the “SafetyBUS p Safety Manual”.