Pilz PSSu E S INC - Manual (Page 29)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-13
4.2 Configuration
4 Function description
Status byte assignment:
(1)
When configuring the module, users can determine the evaluation
method for the status input: single, redundant or diverse. Transmitting
the status via two bits enables simple fault detection: Two redundant
bits must always be the same, two diverse bits must always be different,
otherwise the transmission is faulty.
Key Bit Assignment
Zero pulse: 0 0: No zero pulse at input C
1: Zero pulse at input C
Latch pulse or period length measure-
ment 1 0: Period length or contents of latch memory not transferred
1: Period length or contents of latch memory transferred
Default counter status 2 0: Default counter status not transferred
1: Default counter status transferred
Counter underflow 3 0: No counter underflow
1: Counter underflow
Counter overflow 4 0: No counter overflow
1: Counter overflow
Status input S, Bit 1 5 0: Status input, Bit 1 (message from encoder)
1: Status input, Bit 1
Status input S, Bit 2 6 0: Status input, Bit 2
(1)
1: Status input, Bit 2
Reserved 7 -