Pilz PSSu E F 2DOR 8 - Manual (Page 15)

Installation
Operating Manual PSSu E F 2DOR 8(­T)(­R)
21334­EN­07 15
5 Installation
5.1 General installation guidelines
Please also refer to the PSSuniversal Installation Manual.
CAUTION!
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure against discharge
before touching the product, e.g. by touching an earthed, conductive sur­
face or by wearing an earthed armband.
5.1.1 Dimensions
25,2 mm
76 mm
52,1 mm 8,1 mm
67,7 mm
25,2 mm
56,1 mm
71,8 mm
0,8 mm
128,9 mm
72,7 mm
(2.862")
(2.992")
(2.209")
(2.827")
(0.031")
5.075")
(0.992") (2.051") (0.319")
(0.992")
(2.665")
5.2 Installing the base module
Prerequisite:
} The head module must be installed.
} If the head module does not have an integrated power supply, a supply voltage module
must be installed to the right of the head module.
Please note:
} For mechanical reasons it is not possible to mix base modules with screw terminals and
base modules with cage clamp terminals.