Pilz PNOZ ms2p TTL coated version - Manual (Page 9)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Unit structure
2 Overview
2 2000 Overview Overview 2- 2.1 Unit structure 2100 Unit structure 2- 2.1.1 Range
Range 2- Eigenschaften
Scope of supply:
` Expansion module PNOZ ms2p
` Jumper: 774 639
2.1.2 Unit features
Unit features 2- Gerätemerkmale_Verwendung
Using the product PNOZ ms2p TTL:
Verwendung/Bildunterschrift_multi_Drehzahlwchter
Speed monitor for connection to a base unit from the PNOZmulti mod-
ular safety system
Geraetemerkmale_Zusatz BA Einleitung
The product has the following features:
Drehzahlwaechter_Geraetemerkmale_PNOZ_ms2p ` Monitoring of 2 independent axes
` Connection per axis
– 1 incremental encoder
or
– 2 proximity switches
or
– 1 incremental encoder and 1 proximity switch
` Measured variables:
– Standstill
– Speed (8 values can be set)
– Direction of rotation
` Axis types, input device types and reset mode can be selected in the
PNOZmulti Configurator
` Status indicators for
– Supply voltage
– Incremental encoder
– Proximity switch
– Axis status, standstill and excess speed
– Faults on the system
` Proximity switch connection technology: Plug-in connection termi-
nals (either cage clamp terminal or screw terminal)
` Incremental encoder connection technology:
RJ-45 female connector
` Galvanic isolation between the connections X1, X12 and X22
` Max. 4 speed monitors can be connected to the base unit
Geraetemerkmal_Coated Version ` Coated version:
Increased environmental requirements