Pilz PNOZ ms2p TTL coated version - Manual (Page 4)

Contents
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2
Chapter 6 Commissioning
6.1 General wiring guidelines 6-1
6.2 Preparing for operation 6-2
6.2.1 Connection of proximity switches 6-2
6.2.2 Connection of the incremental encoder 6-2
6.2.2.1 Connect signals of the incremental encod-
er to the speed monitor 6-3
6.2.2.2 Connect incremental encoder to the speed
monitor via an adapter 6-3
6.2.3 Connection of proximity switches and in-
cremental encoder 6-5
6.2.3.1 Proximity switch and incremental encoder
on various axes 6-5
6.2.3.2 Proximity switch and incremental encoder
on one axis 6-6
6.2.4 Connection examples 6-7
6.2.4.1 Connection of 2 proximity switches and an
incremental encoder 6-7
6.2.4.2 Connection of 4 proximity switches 6-8
6.2.4.3 Connection of an incremental encoder and
proximity switch on an axis 6-9
Chapter 7 Operation
7.1 Messages 7-1
7.1.1 Display elements 7-1
7.1.1.1 Display elements for device diagnostics 7-1
7.1.2 Signal statuses 7-2
7.2 Faults - malfunctions 7-3
Chapter 8 Technical details
8.1 Technical Details 8-1
8.2 Order reference 8-3
Chapter 9 Application Examples
9.1 Safe standstill monitoring 9-1
9.2 Safe monitoring with "reduced speed" op-
erating mode 9-2