Pilz PNOZ ms2p TTL coated version - Manual (Page 43)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
9-1
9.1 Safe standstill monitoring
9 Application Examples
9 9000 Application Examples Application Examples 9- 9.1 Safe standstill monitoring 9100 Safe standstill monitoring 9- Applikationsbeispiel_DZE_Sichere Stillstandsüberwachung-PNOZ ms2p
Safe standstill monitoring
Configuration in the PNOZmulti Configurator
` Standstill: depending on requirement
` Speed n1: greater than the maximum permitted speed.
If the "Overspeed" output (see red marking) = "0", either the maximum
permitted speed has been exceeded or the speed monitor has recog-
nised a fault.
"Overspeed" output = "0" must lead to the shutdown of the relevant ax-
is.