Pilz PNOZ ms4p speedcontrol - Manual (Page 27)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-1
8.1 Technical details
8 Technical details
8 8000 Technical details Technical details 8- 8.1 Technical details 8100 Technical details 8-
Technical details
Electrical data
Supply voltage U
B
DC
via base unit 5 V
Power consumption at U
B
DC
via base unit 1.0 W
Residual ripple DC 5 %
Status display LED
Times
Configurable switch-off delay
0 - 2,500 ms
Response time
f>100 Hz: configurable switch-off delay + switch-off delay
on base unit *
10 ms
f<100 Hz: configurable switch-off delay + switch-off delay
on base unit * 10 ms + 1/f
Supply interruption before de-energisation 20 ms
Incremental encoder input
Number of inputs
1
Input signal level 0.5 - 30.0 Vss
Phase position for the differential signals A,/A and B,/B 90° ±30°
Overload protection -30 - 30 V
Input resistance 10 kOhm
Input's frequency range 0 - 500 kHz
Configurable monitoring frequency
without hysteresis
0,1 Hz - 500 kHz
with hysteresis 0,2 Hz - 500 kHz
Connection type (incremental encoder) RJ-45-socket 8-pin
Environmental data
Airgap creepage in accordance with EN 60664-1
Climatic suitability
EN 60068-2-78
EMC EN 60947-5-1
Vibration to EN 60068-2-6
Frequency
10 - 55 Hz
Amplitude 0.35 mm
Ambient temperature 0 - 60 °C
Storage temperature -25 - 70 °C
Mechanical data
Protection type
Mounting (e.g. cabinet)
IP54
Housing IP20
Terminals IP20
DIN rail
Top hat rail
35 x 7.5 EN 50022
Recess width 27 mm
Housing material
Housing
PPO UL 94 V0
Front ABS UL 94 V0