Pilz PNOZ mm0p-T - Manual (Page 24)

Technical details
Operating Manual PNOZ mm0p-T
1002704-EN-01
24
Environmental data 772010
Frequency 10,0 - 150,0 Hz
Max. acceleration 1g
Airgap creepage
In accordance with the standard EN 61131-2
Overvoltage category II
Pollution degree 2
Rated insulation voltage 30 V
Rated impulse withstand voltage 2,50 kV
Shock stress
In accordance with the standard EN 60068-2-27
Acceleration 15g
Duration 11 ms
In accordance with the standard EN 60068-2-29
Acceleration 25g
Duration 6 ms
Max. operating height above sea level <2000 m über NN
Mechanical data 772010
Mounting position Horizontal on top hat rail
Protection type
In accordance with the standard EN 60529
Mounting (e.g. cabinet) IP54
Housing IP20
Terminals IP20
DIN rail
Top hat rail 35 x 7,5 EN 50022
Recess width 27 mm
Max. cable length
Max. cable length per input 1,0 km
Sum of individual cable lengths at the test pulse
output
2 km
Material
Bottom PC
Front PC
Top PC
Cross section of external conductors with screw
terminals
1 core flexible 0,25 - 2,50 mm², 24 - 12 AWG
2 core with the same cross section, flexible without
crimp connectors or with TWIN crimp connectors
0,20 - 1,50 mm², 24 - 16 AWG
Rigid single-core, flexible multi-core or multi-core
with crimp connector
0,5 - 1,5 mm²
Torque setting with screw terminals 0,50 Nm
Connection type Spring-loaded terminal, screw terminal
Cross section of external conductors with spring-load-
ed terminals: flexible with/without crimp connector
0,20 - 2,50 mm², 24 - 12 AWG
Spring-loaded terminals: Terminal points per connec-
tion
2