Pilz PNOZ mm0p-T - Manual (Page 10)

Safety
Operating Manual PNOZ mm0p-T
1002704-EN-01
10
Safety
Intended use
The configurable control system PNOZmulti is used for the safety-related interruption of
safety circuits and is designed for use in:
} E-STOP equipment
} Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
ATTENTION!
Inputs and outputs for standard functions must not be used for safety-relat-
ed applications.
The coated version of the product PNOZ mm0p-T is suitable for use where there are
increased environmental requirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. The product is
designed for use in an industrial environment. It is not suitable for use in a domestic envi-
ronment, as this can lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the product
} Use of the product outside the areas described in this manual
} Use of the product outside the technical details (see chapter entitled “Technical De-
tails”)
System requirements
Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the base unit and PNOZmulti Configurator can be used for this
product.
3
3.1
3.1.1