Pilz PNOZ mm0p-T - Manual (Page 23)

Technical details
Operating Manual PNOZ mm0p-T
1002704-EN-01
23
Inputs 772010
Potential isolation No
Test pulse outputs 772010
Number of test pulse outputs 4
Current 0,1 A
Voltage 24 V
Max. duration of off time during self test 5 ms
Short circuit-proof Yes
Potential isolation No
Semiconductor outputs 772010
Number 4
Switching capability
Voltage 24 V
Current 2,0 A
Power 48 W
Derating of coated version at an ambient temperature
> 50 °C
Voltage 24 V
Current 1 A
Power 24 W
Signal level at "1" UB - 0.5 VDC at 2 A
Residual current at "0" 0,5 mA
Max. capacitive load 1 µF
Max. duration of off time during self test 330 µs
Switch-off delay 30 ms
Potential isolation Yes
Short circuit-proof Yes
Times 772010
Switch-on delay 5,00 s
Supply interruption before de-energisation 20 ms
Simultaneity, channel 1 and 2 3 s
Simultaneity in the two-hand circuit 0,5 s
Environmental data 772010
Ambient temperature
In accordance with the standard EN 60068-2-14
Temperature range -25 - 60 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2
Temperature range -25 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C
Condensation Short-term (only with protective extra low volt-
age)
EMC EN 61131-2
Vibration
In accordance with the standard EN 60068-2-6