Pilz PZE X4V 0,5/24VDC 4n/o fix - Manual (Page 15)

PZE X4V
Operating Manual PZE X4V
1003200­EN­08 15
Mechanical data 774586 774583
Mounting position Any Any
Mechanical life 10,000,000 cycles 10,000,000 cycles
Material
Bottom PPO UL 94 V0 PPO UL 94 V0
Front ABS UL 94 V0 ABS UL 94 V0
Top PPO UL 94 V0 PPO UL 94 V0
Conductor cross section with screw
terminals
1 core flexible 0,20 ­ 4,00 mm², 24 ­ 10 AWG 0,20 ­ 4,00 mm², 24 ­ 10 AWG
2 core with the same cross sec­
tion, flexible with crimp connect­
ors, no plastic sleeve
0,20 ­ 2,50 mm², 24 ­ 14 AWG 0,20 ­ 2,50 mm², 24 ­ 14 AWG
2 core with the same cross sec­
tion, flexible without crimp con­
nectors or with TWIN crimp con­
nectors
0,20 ­ 2,50 mm², 24 ­ 14 AWG 0,20 ­ 2,50 mm², 24 ­ 14 AWG
Torque setting with screw terminals 0,50 Nm 0,50 Nm
Connection type Screw terminal Screw terminal
Mounting type Fixed Fixed
Dimensions
Height 87,0 mm 87,0 mm
Width 22,5 mm 22,5 mm
Depth 121,0 mm 121,0 mm
Weight 185 g 210 g
The standards current on 2009­12 apply.
Safety characteristic data
Operating
mode EN ISO
13849­1:
2008
PL
EN ISO
13849­1:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849­1:
2008
T
M
[year]
Safety con­
tacts,
delayed <30
s
PL d Cat. 3 SIL CL 2 2,48E­09 SIL 2 1,47E­05 20
All the units used within a safety function must be considered when calculating the safety
characteristic data.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.