Waldorf Edition - Manual (Page 57)

Waldorf Edition
User Manual 57 Waldorf
 SUB: The Pitch Bend wheel is used to only change the pitch of the sub oscillator.
The main oscillator’s pitch remains unchanged.
w
This parameter can also be found on the MODULATION menu.
TOTAL TUNE 400...499
This parameter changes the overall tuning of the PPG Wave 2.V. The value refers to
the reference pitch for MIDI note A3. The standard setting for this is 440 Hz, which
is used by most acoustic and electric instruments. We recommend that you only
change the overall tuning, if you are sure of what you’re doing. Please keep in
mind to adjust the tuning of all other use instruments, if you change Total Tune.
w
We have no idea, why this parameter was adjustable between 400Hz and
499Hz in the original PPG. But to keep the charm of the original, we have im-
plemented it in the same way.
SEMITONE 1-8 each 0...63
These parameters are directly connected to KEYBOARD MODE in the DIGITAL
menu (also see the section “Keyboard Mode” on page 20). They are used to define
the pitch of the individual voices in the different play modes in semitone steps. If set
a Semitone value to “0”, then the corresponding semitone will wind up in the 32’
octave range. If you set it to “12”, it winds up in the 16’ octave range etc.

SEMITONE 1 controls the pitch in POLY mode.
 SEMITONE 1 and 2 control the pitches in DUAL mode.
 SEMITONE 1 to 4 control the pitches in QUAD mode.
 SEMITONE 1 to 8 control the pitches in MONO mode.
MODULATION Menu (MOD)
You can use the Modulation menu to make various settings that concern the modu-
lation sources and their respective targets.
To open the Modulation menu, press the MOD button on the PlugIn panel. The but-
ton lights up in red. Pressing it again lets you switch back to the analog user inter-
face.
The next sections describe the individual functions in detail.