Waldorf Edition - Manual (Page 14)

Waldorf Edition
User Manual 14 Waldorf
Key Combinations
 If you hold down the [Strg] key (on the PC) or [Command] key (on a Mac compu-
ter) when you click on a control, its value is automatically set to its default (e.g.
Cutoff is set to 100%, Env to 0%).
 You can increase the resolution of a dial by holding down the [Shift] key on your
computer keyboard when use the “linear knob mode”. If a dial is set to “circle
mode” (so that you change a value by dragging around the dial in a circle), then
you can temporarily change to “linear knob mode” by holding down [Alt].
The "Automatic" Keyboard
The Attack has a 5 octave keyboard in its user interface. When selecting one of the
upper 12 sounds, the Attack’s keyboard screen will appear. You can play these
sounds melodically through your MIDI keyboard or by clicking on the displayed
keyboard with your mouse. When selecting one of the lower 12 sounds, the key-
board is hidden.